diff --git a/1.sh b/1.sh
index 61b2da1..679e73c 100644
--- a/1.sh
+++ b/1.sh
@@ -13,6 +13,31 @@ print_red() { echo -e "\033[31m\033[01m$1$2\033[0m"; }
 print_green() { echo -e "\033[32m\033[01m$1$2\033[0m"; }
 print_yellow() { echo -e "\033[33m\033[01m$1$2\033[0m"; }
 
+SCRIPT_BASE_URL="https://git.1-h.cc/Scripts/Linux/raw/branch/2026"
+SCRIPT_DIR=""
+if [ -n "${BASH_SOURCE[0]:-}" ]; then
+  SCRIPT_DIR=$(CDPATH= cd -- "$(dirname -- "${BASH_SOURCE[0]}")" 2>/dev/null && pwd || true)
+fi
+
+load_shared_script() {
+  local relative_path="$1"
+  local local_path remote_url
+
+  local_path="$SCRIPT_DIR/$relative_path"
+  remote_url="$SCRIPT_BASE_URL/$relative_path"
+
+  if [ -n "$SCRIPT_DIR" ] && [ -f "$local_path" ]; then
+    source "$local_path"
+  elif command -v curl >/dev/null 2>&1; then
+    source <(curl -fsSL "$remote_url")
+  elif command -v wget >/dev/null 2>&1; then
+    source <(wget -q -O - "$remote_url")
+  else
+    print_red "未找到 curl 或 wget，无法加载 $relative_path"
+    exit 1
+  fi
+}
+
 if [ "$EUID" -ne 0 ]; then
   print_red "请使用 sudo 运行此脚本"
   exit 1
@@ -46,6 +71,8 @@ else
   exit 1
 fi
 
+load_shared_script "zram/install.sh"
+
 sysctl_config() {
   print_green "###################"
   print_green "##### sysctl ######"
@@ -271,120 +298,6 @@ start_watchtower() {
     containrrr/watchtower "${WATCHTOWER_ARGS[@]}" $WATCHTOWER_NAME
 }
 
-install_zram() {
-  print_green "###################"
-  print_green "###### zram #######"
-  print_green "###################"
-
-  if [ "$SYSTEM_TYPE" != "debian" ]; then
-    print_yellow "当前仅在 Debian 系统上配置 zram-tools，已跳过"
-    return 0
-  fi
-
-  if [ -f /.dockerenv ] || grep -qaE '(docker|containerd|kubepods|lxc)' /proc/1/cgroup 2>/dev/null; then
-    print_yellow "检测到容器环境，跳过 zram 配置"
-    return 0
-  fi
-
-  echo "正在准备 zram-tools..."
-  if dpkg -s zram-tools >/dev/null 2>&1; then
-    echo "zram-tools 已安装，跳过安装步骤"
-  else
-    apt update && apt install zram-tools -y
-  fi
-
-  if command -v modprobe >/dev/null 2>&1; then
-    if modprobe zram 2>/dev/null; then
-      echo "zram 内核模块已加载"
-    else
-      print_yellow "内核不支持 zram 模块，跳过 zram 配置"
-      return 0
-    fi
-  else
-    print_yellow "未找到 modprobe，继续尝试配置 zram-tools"
-  fi
-
-  if command -v udevadm >/dev/null 2>&1; then
-    udevadm settle || true
-  fi
-
-  if [ ! -d /sys/block/zram0 ] || [ ! -b /dev/zram0 ]; then
-    print_yellow "未检测到可用的 zram0 设备，跳过 zram 配置"
-    return 0
-  fi
-
-  local total_mem algo percent available_algorithms
-  total_mem=$(awk '/MemTotal/{print int($2 / 1024)}' /proc/meminfo)
-
-  if ! [[ "$total_mem" =~ ^[0-9]+$ ]] || [ "$total_mem" -le 0 ]; then
-    print_yellow "无法准确检测总内存，跳过 zram 配置"
-    return 0
-  fi
-
-  available_algorithms=$(tr ' ' '\n' </sys/block/zram0/comp_algorithm 2>/dev/null | tr -d '[]' || true)
-  echo "检测到支持的 zram 算法: ${available_algorithms:-unknown}"
-
-  choose_zram_algorithm() {
-    local candidate
-    for candidate in "$@"; do
-      if printf '%s\n' "$available_algorithms" | grep -qx "$candidate"; then
-        printf '%s\n' "$candidate"
-        return 0
-      fi
-    done
-    return 1
-  }
-
-  echo "检测到总内存: ${total_mem}MB"
-
-  if [ "$total_mem" -le 2500 ]; then
-    percent="100"
-
-    if algo=$(choose_zram_algorithm zstd lz4 lzo-rle lzo); then
-      if [ "$algo" = "zstd" ]; then
-        echo "策略：内存 <= 2G，使用 zstd 算法 (100% 占比)"
-      else
-        echo "策略：内存 <= 2G，但内核未报告 zstd 支持，回退到 $algo (100% 占比)"
-      fi
-    else
-      print_yellow "未检测到受支持的 zram 压缩算法，跳过 zram 配置"
-      return 0
-    fi
-  else
-    percent="60"
-
-    if algo=$(choose_zram_algorithm lz4 zstd lzo-rle lzo); then
-      if [ "$algo" = "lz4" ]; then
-        echo "策略：内存 > 2G，使用 lz4 算法 (60% 占比)"
-      else
-        echo "策略：内存 > 2G，但内核未报告 lz4 支持，回退到 $algo (60% 占比)"
-      fi
-    else
-      print_yellow "未检测到受支持的 zram 压缩算法，跳过 zram 配置"
-      return 0
-    fi
-  fi
-
-  cat <<EOF >/etc/default/zramswap
-# 自动生成的 zram 配置
-ALGO=$algo
-PERCENT=$percent
-PRIORITY=100
-EOF
-
-  if ! systemctl restart zramswap; then
-    print_red "zramswap 服务重启失败"
-    systemctl status zramswap.service --no-pager || true
-    journalctl -u zramswap.service -n 20 --no-pager || true
-    return 1
-  fi
-
-  echo "---------------------------------------"
-  echo "zram 部署完成！当前状态："
-  zramctl || true
-  echo "---------------------------------------"
-}
-
 modify_authorized_keys
 bash_aliases
 install_docker
diff --git a/zram/install.sh b/zram/install.sh
new file mode 100644
index 0000000..8d1ae35
--- /dev/null
+++ b/zram/install.sh
@@ -0,0 +1,144 @@
+#!/usr/bin/env bash
+
+if ! declare -F print_red >/dev/null 2>&1; then
+  print_red() { echo -e "\033[31m\033[01m$1$2\033[0m"; }
+fi
+
+if ! declare -F print_green >/dev/null 2>&1; then
+  print_green() { echo -e "\033[32m\033[01m$1$2\033[0m"; }
+fi
+
+if ! declare -F print_yellow >/dev/null 2>&1; then
+  print_yellow() { echo -e "\033[33m\033[01m$1$2\033[0m"; }
+fi
+
+if [ -z "${SYSTEM_TYPE:-}" ]; then
+  if [ -f /etc/debian_version ]; then
+    SYSTEM_TYPE="debian"
+  elif [ -f /etc/alpine-release ]; then
+    SYSTEM_TYPE="alpine"
+  else
+    SYSTEM_TYPE="unknown"
+  fi
+fi
+
+install_zram() {
+  print_green "###################"
+  print_green "###### zram #######"
+  print_green "###################"
+
+  if [ "$SYSTEM_TYPE" != "debian" ]; then
+    print_yellow "当前仅在 Debian 系统上配置 zram-tools，已跳过"
+    return 0
+  fi
+
+  if [ -f /.dockerenv ] || grep -qaE '(docker|containerd|kubepods|lxc)' /proc/1/cgroup 2>/dev/null; then
+    print_yellow "检测到容器环境，跳过 zram 配置"
+    return 0
+  fi
+
+  echo "正在准备 zram-tools..."
+  if dpkg -s zram-tools >/dev/null 2>&1; then
+    echo "zram-tools 已安装，跳过安装步骤"
+  else
+    apt update && apt install zram-tools -y
+  fi
+
+  if command -v modprobe >/dev/null 2>&1; then
+    if modprobe zram 2>/dev/null; then
+      echo "zram 内核模块已加载"
+    else
+      print_yellow "内核不支持 zram 模块，跳过 zram 配置"
+      return 0
+    fi
+  else
+    print_yellow "未找到 modprobe，继续尝试配置 zram-tools"
+  fi
+
+  if command -v udevadm >/dev/null 2>&1; then
+    udevadm settle || true
+  fi
+
+  if [ ! -d /sys/block/zram0 ] || [ ! -b /dev/zram0 ]; then
+    print_yellow "未检测到可用的 zram0 设备，跳过 zram 配置"
+    return 0
+  fi
+
+  local total_mem algo percent available_algorithms
+  total_mem=$(awk '/MemTotal/{print int($2 / 1024)}' /proc/meminfo)
+
+  if ! [[ "$total_mem" =~ ^[0-9]+$ ]] || [ "$total_mem" -le 0 ]; then
+    print_yellow "无法准确检测总内存，跳过 zram 配置"
+    return 0
+  fi
+
+  available_algorithms=$(tr ' ' '\n' </sys/block/zram0/comp_algorithm 2>/dev/null | tr -d '[]' || true)
+  echo "检测到支持的 zram 算法: ${available_algorithms:-unknown}"
+  echo "检测到总内存: ${total_mem}MB"
+
+  choose_zram_algorithm() {
+    local candidate
+    for candidate in "$@"; do
+      if printf '%s\n' "$available_algorithms" | grep -qx "$candidate"; then
+        printf '%s\n' "$candidate"
+        return 0
+      fi
+    done
+    return 1
+  }
+
+  if [ "$total_mem" -le 2500 ]; then
+    percent="100"
+
+    if algo=$(choose_zram_algorithm zstd lz4 lzo-rle lzo); then
+      if [ "$algo" = "zstd" ]; then
+        echo "策略：内存 <= 2G，使用 zstd 算法 (100% 占比)"
+      else
+        echo "策略：内存 <= 2G，但内核未报告 zstd 支持，回退到 $algo (100% 占比)"
+      fi
+    else
+      print_yellow "未检测到受支持的 zram 压缩算法，跳过 zram 配置"
+      return 0
+    fi
+  else
+    percent="60"
+
+    if algo=$(choose_zram_algorithm lz4 zstd lzo-rle lzo); then
+      if [ "$algo" = "lz4" ]; then
+        echo "策略：内存 > 2G，使用 lz4 算法 (60% 占比)"
+      else
+        echo "策略：内存 > 2G，但内核未报告 lz4 支持，回退到 $algo (60% 占比)"
+      fi
+    else
+      print_yellow "未检测到受支持的 zram 压缩算法，跳过 zram 配置"
+      return 0
+    fi
+  fi
+
+  cat <<EOF >/etc/default/zramswap
+ALGO=$algo
+PERCENT=$percent
+PRIORITY=100
+EOF
+
+  if ! systemctl restart zramswap; then
+    print_red "zramswap 服务重启失败"
+    systemctl status zramswap.service --no-pager || true
+    journalctl -u zramswap.service -n 20 --no-pager || true
+    return 1
+  fi
+
+  echo "---------------------------------------"
+  echo "zram 部署完成！当前状态："
+  zramctl || true
+  echo "---------------------------------------"
+}
+
+if [ "${BASH_SOURCE[0]:-}" = "$0" ] || [ -z "${BASH_SOURCE[0]:-}" ]; then
+  if [ "$EUID" -ne 0 ]; then
+    print_red "请使用 sudo 运行此脚本"
+    exit 1
+  fi
+
+  install_zram
+fi
diff --git a/show_zram_status.sh b/zram/show_status.sh
similarity index 66%
rename from show_zram_status.sh
rename to zram/show_status.sh
index 008fefa..bd1c29d 100644
--- a/show_zram_status.sh
+++ b/zram/show_status.sh
@@ -1,9 +1,16 @@
 #!/usr/bin/env bash
-#
-# ...
-#
-# 使用方法:
-# URL="https://git.1-h.cc/Scripts/Linux/raw/branch/2026/show_zram_status.sh"; curl -fsSL "$URL" | bash
+
+format_zram_bytes() {
+  awk -v bytes="$1" 'BEGIN {
+    split("B KiB MiB GiB TiB PiB", units, " ")
+    idx = 1
+    while (bytes >= 1024 && idx < 6) {
+      bytes /= 1024
+      idx++
+    }
+    printf "%.2f %s", bytes, units[idx]
+  }'
+}
 
 show_zram_status() {
   echo "========== zram 运行战报 =========="
@@ -48,25 +55,15 @@ EOF
 
   ratio=$(awk -v data="$data_size" -v total="$total_mem" 'BEGIN { printf "%.2f", data / total }')
 
-  format_bytes() {
-    awk -v bytes="$1" 'BEGIN {
-      split("B KiB MiB GiB TiB PiB", units, " ")
-      idx = 1
-      while (bytes >= 1024 && idx < 6) {
-        bytes /= 1024
-        idx++
-      }
-      printf "%.2f %s", bytes, units[idx]
-    }'
-  }
-
   echo "----------- 汇总 -----------"
-  echo "1. 原始数据量: $(format_bytes "$data_size")"
-  echo "2. 压缩后大小: $(format_bytes "$compr_size")"
-  echo "3. 实际占用内存: $(format_bytes "$total_mem")"
+  echo "1. 原始数据量: $(format_zram_bytes "$data_size")"
+  echo "2. 压缩后大小: $(format_zram_bytes "$compr_size")"
+  echo "3. 实际占用内存: $(format_zram_bytes "$total_mem")"
   echo "4. 压缩倍率: ${ratio}x"
-  echo "5. 为系统节省了: $(format_bytes "$saved_bytes") 物理内存"
+  echo "5. 为系统节省了: $(format_zram_bytes "$saved_bytes") 物理内存"
   echo "==================================="
 }
 
-show_zram_status
+if [ "${BASH_SOURCE[0]:-}" = "$0" ] || [ -z "${BASH_SOURCE[0]:-}" ]; then
+  show_zram_status
+fi